NEWLY RELEASED FORTINET NSE7_EFW-7.2 DUMPS IN THREE FORMATS [2025]

Newly Released Fortinet NSE7_EFW-7.2 Dumps in Three Formats [2025]

Newly Released Fortinet NSE7_EFW-7.2 Dumps in Three Formats [2025]

Blog Article

Tags: Dumps NSE7_EFW-7.2 Vce, Answers NSE7_EFW-7.2 Real Questions, NSE7_EFW-7.2 Test Simulator, NSE7_EFW-7.2 Valid Test Sims, NSE7_EFW-7.2 Certification Test Answers

Without complex collection work and without no such long wait, you can get the latest and the most trusted NSE7_EFW-7.2 exam materials on our website. The different versions of our dumps can give you different experience. There is no doubt that each version of the NSE7_EFW-7.2 Materials is equally effective. To instantly purchase our NSE7_EFW-7.2 exam materials with the safe payment PayPal, you can immediately download it to use.

Fortinet NSE7_EFW-7.2 Exam Syllabus Topics:

TopicDetails
Topic 1
  • Security profiles: Using FortiManager as a local FortiGuard server is discussed in this topic. Moreover, it delves into configuring web filtering, application control, and the intrusion prevention system (IPS) in an enterprise network.
Topic 2
  • Central management: The topic of Central management covers implementing central management.
Topic 3
  • Routing: It covers implementing OSPF to route enterprise traffic and Border Gateway Protocol (BGP) to route enterprise traffic.
Topic 4
  • VPN: Implementing IPsec VPN IKE version 2 is discussed in this topic. Additionally, it delves into implementing auto-discovery VPN (ADVPN) to enable on-demand VPN tunnels between sites.
Topic 5
  • System configuration: This topic discusses Fortinet Security Fabric and hardware acceleration. Furthermore, it delves into configuring various operation modes for an HA cluster.

>> Dumps NSE7_EFW-7.2 Vce <<

Answers NSE7_EFW-7.2 Real Questions, NSE7_EFW-7.2 Test Simulator

Fortinet exam simulation software is the best offline method to boost preparation for the Fortinet NSE7_EFW-7.2 examination. The software creates a NSE7_EFW-7.2 real practice test-like scenario where aspirants face actual NSE7_EFW-7.2 exam questions. This feature creates awareness among users about Fortinet NSE 7 - Enterprise Firewall 7.2 exam pattern and syllabus. With the desktop Fortinet NSE7_EFW-7.2 Practice Exam software, you can practice for the test offline via any Windows-based computer.

Fortinet NSE 7 - Enterprise Firewall 7.2 Sample Questions (Q20-Q25):

NEW QUESTION # 20
Exhibit.

Refer to the exhibit, which contains an active-active toad balancing scenario.
During the traffic flow the primary FortiGate forwards the SYN packet to the secondary FortiGate.
What is the destination MAC address or addresses when packets are forwarded from the primary FortiGate to the secondary FortiGate?

  • A. Secondary physical MAC port1
  • B. Secondary virtual MAC port1 then physical MAC port1
  • C. Secondary virtual MAC port1
  • D. Secondary physical MAC port2 then virtual MAC port2

Answer: A

Explanation:
In an active-active load balancing scenario, when the primary FortiGate forwards the SYN packet to the secondary FortiGate, the destination MAC address would be the secondary's physical MAC on port1, as the packet is being sent over the network and the physical MAC is used for layer 2 transmissions.


NEW QUESTION # 21
Exhibit.

Refer to the exhibit, which contains a partial VPN configuration.
What can you conclude from this configuration1?

  • A. FortiGate creates separate virtual interfaces for each dial up client.
  • B. The VPN should use the dynamic routing protocol to exchange routing information Through the tunnels.
  • C. The routing table shows a single IPSec virtual interface.
  • D. Dead peer detection s disabled.

Answer: D

Explanation:
The configuration line "set dpd on-idle" indicates that dead peer detection (DPD) is set to trigger only when the tunnel is idle, not actively disabled1. References: FortiGate IPSec VPN User Guide - Fortinet Document Library From the given VPN configuration, dead peer detection (DPD) is set to 'on-idle', indicating that DPD is enabled and will be used to detect if the other end of the VPN tunnel is still alive when no traffic is detected.
Hence, option C is incorrect. The configuration shows the tunnel set to type 'dynamic', which does not create separate virtual interfaces for each dial-up client (A), and it is not specified that dynamic routing will be used (B). Since this is a phase 1 configuration snippet, the routing table aspect (D) cannot be concluded from this alone.


NEW QUESTION # 22
Which two statements about IKE vision 2 are true? (Choose two.)

  • A. Phase 1 includes main mode
  • B. It exchanges a minimum of four messages to establish a secure tunnel
  • C. It supports the extensible authentication protocol (EAP)
  • D. It supports the XAuth protocol.

Answer: B,C

Explanation:
IKE version 2 supports the extensible authentication protocol (EAP), which allows for more flexible and secure authentication methods1. IKE version 2 also exchanges a minimum of four messages to establish a secure tunnel, which is more efficient than IKE version 12. Reference: = IKE settings | FortiClient 7.2.2 - Fortinet Documentation, Technical Tip: How to configure IKE version 1 or 2 ... - Fortinet Community


NEW QUESTION # 23
Refer to the exhibit, which shows a custom signature.

Which two modifications must you apply to the configuration of this custom signature so that you can save it on FortiGate? (Choose two.)

  • A. Ensure that the header syntax is F-SBID.
  • B. Add attack_id.
  • C. Start options with --.
  • D. Add severity.

Answer: B,D

Explanation:
For a custom signature to be valid and savable on a FortiGate device, it must include certain mandatory fields.
Severity is used to specify the level of threat that the signature represents, and attack_id is a unique identifier for the signature. Without these, the signature would not be complete and could not be correctly utilized by the FortiGate's Intrusion Prevention System (IPS).


NEW QUESTION # 24
Winch two statements about ADVPN are true? (Choose two)

  • A. lt supports NAI for on-demand tunnels
  • B. auto-discovery receiver must be set to enable on the Spokes.
  • C. Spoke to-spoke traffic never goes through the hub
  • D. Routing is configured by enabling add-advpn-route

Answer: A,B

Explanation:
ADVPN (Auto Discovery VPN) is a feature that allows to dynamically establish direct tunnels (called shortcuts) between the spokes of a traditional Hub and Spoke architecture. The auto-discovery receiver must be set to enable on the spokes to allow them to receive NHRP messages from the hub and other spokes. NHRP (Next Hop Resolution Protocol) is used for on-demand tunnels, which are established when there is traffic between spokes. Routing is configured by enabling add-nhrp-route, not add-advpn-route. Reference := ADVPN | FortiGate / FortiOS 7.2.0 | Fortinet Document Library, Technical Tip: Fortinet Auto Discovery VPN (ADVPN)


NEW QUESTION # 25
......

In today's technological world, more and more students are taking the Fortinet NSE7_EFW-7.2 exam online. While this can be a convenient way to take a NSE7_EFW-7.2 exam dumps, it can also be stressful. Luckily, ActualTorrent's best Fortinet NSE7_EFW-7.2 Exam Questions can help you prepare for your NSE7_EFW-7.2 certification exam and reduce your stress.

Answers NSE7_EFW-7.2 Real Questions: https://www.actualtorrent.com/NSE7_EFW-7.2-questions-answers.html

Report this page